Stirrer Accessories
Bellco Glass, Inc. Round Bottom Marine Impeller,15L
MADE IN THE USA. Blade dimension: 4" od Marine prop – Right-HandedShaft oal:14 1/2"Paddles and impeller assemblies for cell cultureConstructed of 316l electropolished stainless steelReduces shear in delicate cell cultureMarine impeller includes 1/2" shaft and impeller bladeOmni and z-z paddles are one piece welded, 1/4" shaft
Bellco Glass, Inc. IOB w/ Water Jacketed Flask,250mL
Internal impeller is useful because it decreases risk of contamination thorugh the cap. Has an adjustable shaft to align the paddle with the bottom of the flask. Large paddle promotes increased oxygenation with low shear. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. MADE IN THE USA.
Bellco Glass, Inc. Glass Ball Impeller Only,500mL
Description: Glass Ball Impeller Assembly Only. MADE IN THE USASize: 500mLScrew Cap: Blue PP, 100mm OD x 22.4mm TCap Seal: Teflon, 95.3mm OD x 10.4mm TSealing Ring: Blue silicone rubber, 91.4mm OD x 76.2mm ID x 6.1mm TFlex Tube: Soft silicone, 57.2mm OAL, 0.312” OD x 0.248” IDMagnet Tube: Type 1 Class A Borosilicate Glass, 110mm OAL, 28mm OD ball, houses one cast alnico magnet
Bellco Glass, Inc. Stainless Steel Over Head Drive Short Width Impeller Assembly , 8L Short Width
Short width stainless steel folding impeller assembly for standard bioreactor vessels 8l. MADE IN THE USA. 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3" x 6"
Bellco Glass, Inc. Stainless Steel Marine Shaft Only, 15L With Clip
Material: 316l stainless steel with electropolish finishDimensions: 1/2" x 14 1/2"Size: 15lIncludes: e-clip for mounting marine prop (1964-73000). MADE IN THE USA
Bellco Glass, Inc. CT II Digital.Over Head Drive Complete, 115V
The Bellco Digital CTII Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. The Overhead Drives feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Units are powered by a 24VDC power supply (included) and are CE compliant. A detachable speed cable (included) attaches to the rear of the Digital CTII to allow real-time monitoring and trending of data when connected to a Celltrol II controller.. MADE IN THE USA
Bellco Glass, Inc. Low Profile PTFE Impeller Assembly ,6 L
The Bellco low profile ptfe impellers are designed to be used with bellco low profile cell culture vessels. These low profile impeller consist of a semi-rigid ptfe blade, ptfe paddle holder and stainless steel shaft. Impellers are shipped fully assembled. Paddle Size: 3"Tx 6 3/4"W. Requires Bellco Overhead Drive & Cap Assembly. MADE IN THE USA
Bellco Glass, Inc. Impeller Assembly ,15-36L
Glass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. MADE IN THE USA. Glass shaft ptfe magnet Size: 15-36l CONSIST OF: PTFE MAGNET HOLDER and PTFE COATED MAGNET
Electron Microscopy Sciences Pro-Craft Flex Shaft Machine Replacement Shaft
Use for Pro-Craft Fexible Shaft Machine.
Electron Microscopy Sciences Pro-Craft 1/8 Hp Flex Shaft Machine, 220 V
A versatile hang-up flexible shaft machine. Available either 1/10 or 1/8 HP ball bearing motor, variable speed 0 - 18 RPM. Complete kit comes with a hand piece, 39" (1 m) Flexible shaft, variable speed foot pedal, and a bracket for hanging. Lifetime warranty on motor under normal use.
Ace Glass, Inc. Bearing, Trubore, glass, 10mm, 29/42
10mm Trubore glass bearing with 29/42 standard taper joint. Bearing is for use with aluminum packing box in low positive pressure and vacuum applications. Using the graphite-impregnated PTFE packing and ACE Stir-Lube, pressures down to 7 microns have been obtained at 170rpm, using only a mechanical pump. Speeds over 1000rpm are not advisable due to heat generated. Indefinite packing life. Frequent tightening of the packing box is unnecessary once the packing has run in. The high vacuum lubricant trap adapter prevents lubricant from running into stirred material. Use with precision ground, 10mm stirring shaft.
Grainger Shaft Grounding Ring For 2 1/8 in Shaft
The AEGIS Shaft Grounding Ring is a one-piece stainless steel ring that provides a path to ground for induced shaft voltages. It has a split-ring design that allows for easy installation without having to remove the coupling. This grounding ring fits shafts from 1-3/4" to 7-15/16" in diameter and has a durable construction that provides long service life. It comes with mounting hardware for attaching a grounding cable. The AEGIS grounding ring is made in the USA and is ideal for grounding motor shaft voltages to prevent electrical damage.